Large-scale printing is our specialty, and that doesn't stop at blueprints; we have everything from retail signage to outdoor events covered.

We're always prepared for your next project.  We carry an extensive stock of media.  Some of the materials we keep on hand include:

18# Bond • 20# Bond • 24# Bond • 36# Bond • 46# Bond
Water-resistant 48# Bond • Scrim Vinyl • Adhesive Vinyl
Polyester Film • Light-weight Vinyl • Matte Photo Paper
Satin Photo Paper • Gloss Photo Paper • Canvas
Watercolor Art Paper • Fabric • Matte Film • Clear Film
Backlit Film • 16# Vellum • 20# Vellum • Polypropylene
Gatorboard • Foamcore • Matboard • Plasticore

When's the last time you accidentally "knicked" the corner or edge of a wide format mounted image? By installing plastic edging, we can completely hide those bent corners or edges.

Had the edge of your mounted poster delaminate? We can install plastic edging, then acetone weld it to the substrate, and completely eliminate any further delamination.

When was the last time you attempted to securely suspend a mounted image from the ceiling, and was frustrated because you either couldn’t find a system that would hang the image perfectly plumb, or it fell to the ground? Our special metal mounting brackets snap into the frame creating secure points to hang your image.

When was the last time that you produced a sign on 1/2" plywood or MDO board for outside use, and spent more time continuously priming, painting, and repainting the outside edge in an effort to "seal the edge"? For outside signs, see how fast we can turn plastic edging into a weatherproof "raincap" by applying a generous bead of silicone caulking to the edge of your plywood, then embed a 1/2” plastic edge into the wet silicone.

Foamcore - Foamcore is an economical way to add a rigid backing to your signs and displays. Great for display on an easel, for hanging signs, or any other indoor sign that needs a firm backing. Available in 3/16" and 1/2" thicknesses. May be framed and laminated.

Gatorboard - Gatorboard is a dense foam substrate that resists warping. Ideal for long term indoor signs. Available in 3/16" thickness. May be framed and laminated.

Plasticore - Plasticore is an inexpensive waterproof corrugated plastic that may be used for indoor and outdoor signs. Graphics are adhered to it using a vinyl material. It may not be laminated or framed.

Plywood - Outdoor signs may be mounted to plywood using a vinyl material. The plywood should be framed in PVC edging to prevent de-lamination.

Other mounting options may be available. Please call us if you have a special need.

We may coat a poster that is mounted on Foamcore or Gatorboard with a protective layer of lamination. We carry the following styles:

Gloss
enhances an image, but picks up glare from nearby lights

Lustre
gives the image a slight shine without the blinding glare

Matte
a dull laminate, used primarily for protection, that picks up no glare

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

We may also coat vinyl or other flexible substrates with a liquid laminate. The liquid laminate is more flexible then film laminate and therefore may be used on non-rigid materials.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Encapsulation is another option to embed an image inside 10 mil thick glossy plastic. Note that their are often less expensive alternatives to encapsulation that provide waterfastness. Call us for more information.